 |
Piecin stuff together :) |
 |
06-08-2009, 09:46 PM
|
#1 (permalink)
|
|
Location: Gilbert, AZ
DC Cash: 1,112,714
|
Piecin stuff together :)
well like the title says, I'm gonna start peicin my bike together.
I talked to my builder that did the porting on my cylinders and he says I can run some 35mm carbs...
So I'm gonna 
Pickin up some 35mm pwk's tomorrow, would have tonight but wells fargo was bein stupid and he didnt wanna accept a personal check from my dad... (who would nowadays).
So when I get back from colorado in a month I'm gonna buy new intakes and look around for some small bore inframe CPI's. maybe even some V-forces but I doubt it.
btw.... with these carbs, am I gonna have to buy new throttle cables...?
__________________
2000 Banshee
 
one bore~19cc Pro Design Cool Heads~Toomey T5 pipes~ hillshooting-aggressive play port~35mm PWK air strikers~timing advanced 4degrees~lightened flywheel~V-force 2's~+4 inch chrome Lonestar Racing swingarm~Cascade Clutch cover, clutch lever, lights, pipe hangers~K&N clampers~Skat traks
|
|
|
|
 |
|
06-08-2009, 10:22 PM
|
#2 (permalink)
|
|
Location: Sunny So Cal
DC Cash: 4,006,351
|
Nope, the cable you have now should work just fine! Atleast have Wildcard Racing port the stock cages and upgrade those plastic petals to carbon fiber reeds! 
Sounds like that Shee is goinig to rip good!
__________________
|
|
|
|
|
06-09-2009, 07:57 AM
|
#3 (permalink)
|
|
Location: Gilbert, AZ
DC Cash: 1,112,714
|
I'll just wait til I can get everything to be perfect intake-wise before i put it all on.
__________________
2000 Banshee
one bore~19cc Pro Design Cool Heads~Toomey T5 pipes~ hillshooting-aggressive play port~35mm PWK air strikers~timing advanced 4degrees~lightened flywheel~V-force 2's~+4 inch chrome Lonestar Racing swingarm~Cascade Clutch cover, clutch lever, lights, pipe hangers~K&N clampers~Skat traks
|
|
|
|
|
06-09-2009, 02:03 PM
|
#4 (permalink)
|
|
DC Cash: 752,391
|
If you have the TORS delete kit on you won't need a different cable, if you still have your TORS caps you will need a different one. I haven't seen any real noteable gains with the v-forces over stock ported cages with good petals on the smaller motors.
__________________
PM me for all of your ATV/MC performance needs:
Engine machinework & Porting
Custom Engines 2&4 stroke
Custom Chassis & Components
OEM & Aftermarket Parts
& More
If you want it we can build it!
|
|
|
|
|
06-12-2009, 09:25 PM
|
#5 (permalink)
|
|
Location: Gilbert, AZ
DC Cash: 1,112,714
|
welp, picked up a set of 35's this week. they're sittin at home waitin for me to get back from colorado. I'll pick up 35mil intakes, then sell the stock carbs and stuff...
anyway then after setting up the carbs, then selling my pipes and seeing what I can get, I'll hopefully grab a set of CPI inframes.
after that, maybe I'll look for v-forces, then if I cant get a great deal, then grab some pedals then try and get the cages ported.
__________________
2000 Banshee
one bore~19cc Pro Design Cool Heads~Toomey T5 pipes~ hillshooting-aggressive play port~35mm PWK air strikers~timing advanced 4degrees~lightened flywheel~V-force 2's~+4 inch chrome Lonestar Racing swingarm~Cascade Clutch cover, clutch lever, lights, pipe hangers~K&N clampers~Skat traks
|
|
|
|
|
06-12-2009, 09:55 PM
|
#6 (permalink)
|
|
Location: SO*AZ = SUCKA
DC Cash: 4,404,640
|
You won't regret the CPI's. Money well spent.
__________________
DC MODERATOR
09 Kawi Teryx 750 twin Sport edition
05 400EX ( My little girls )
03 Preddy HMF pipe, Twin Air, Procom CDI, Dynojet
03 E-Z-GO Lifted on 25" muds, CD player. "Pimp Ride"
01 Banshee 4mm long rod, CPI inframes, 36mm PWK's, K&N Pods, HD clutch, billet impeller, custom paint, 10 paddle Extremes. More to come.
01 Scrammy 500 E series pipe, K&N
www.myspace.com/twistedtrik
|
|
|
|
|
06-13-2009, 07:51 AM
|
#7 (permalink)
|
|
Location: Gilbert, AZ
DC Cash: 1,112,714
|
I bet, Flotek told me there are some great improvements over Toomey's.
something around 6 ponies if setup right.
__________________
2000 Banshee
one bore~19cc Pro Design Cool Heads~Toomey T5 pipes~ hillshooting-aggressive play port~35mm PWK air strikers~timing advanced 4degrees~lightened flywheel~V-force 2's~+4 inch chrome Lonestar Racing swingarm~Cascade Clutch cover, clutch lever, lights, pipe hangers~K&N clampers~Skat traks
|
|
|
|
|
06-13-2009, 08:28 AM
|
#8 (permalink)
|
|
Location: 30 min from LS Ut.
DC Cash: 2,439,063
|
They are really nice pipes I love mine. Also about the reeds, I know alot of guys that prefer to run the stock cages ported with diffrent reeds, over the v-force. Just fyi.
__________________
2003 4mil, agrressive dune banshee
soon to come: 89 10mil alky drag banshee
|
|
|
|
|
06-13-2009, 11:58 AM
|
#9 (permalink)
|
|
Location: Sunny So Cal
DC Cash: 4,006,351
|
Nice Banshee Hop Ups right there boy!
150 to 200, ask Showtime bout his $40 deal!
If sticking with stockers talk to RTCC on E2S who has a set of ported stockers and aftermarket reed petals for $50 bux!
__________________
|
|
|
|
|
06-13-2009, 06:28 PM
|
#10 (permalink)
|
|
Location: Gilbert, AZ
DC Cash: 1,112,714
|
you were tellin me bout that! that's nuts.....
and I'm totally gonna do it if I cant find v-forces for cheap.
__________________
2000 Banshee
one bore~19cc Pro Design Cool Heads~Toomey T5 pipes~ hillshooting-aggressive play port~35mm PWK air strikers~timing advanced 4degrees~lightened flywheel~V-force 2's~+4 inch chrome Lonestar Racing swingarm~Cascade Clutch cover, clutch lever, lights, pipe hangers~K&N clampers~Skat traks
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
All times are GMT -8. The time now is 11:21 AM. |
|
|
