Yamaha Banshee Wire Harness Project

[QuickSand]

I haven't even touched it! But I will though.. Debating if I want to shorten it so I can tuck it under the gas tank.
Let's see.. Bar controls will be cut off besides the off off button assemply.. Tors.. Rear Brake Actuator. I'm keeping all lights too! Really nothing to it. Once spread yout you can see where you can cut.. Just follow unwanted wires and snip em off.. You'll also notice some areas that don't need that much wire! I'll definately take & post pics for ya!

[SHOWTIME]

exactly...we cut them down to bare minimum.
no need for that safety crap lol. duneraider
guts them out all the time, i should have him do
a step by step FAQ.

[QuickSand]

/\/\
That would be cool!

[cornfeedbanshee]

I striped my factory harness. cut the torrs off moved on/off switch and key to under the seat and ran the tail light wires in the frame. all the rest I used heat shrink.
turned out very clean.

[dunedog]

Originally Posted by SHOWTIME

exactly...we cut them down to bare minimum.
no need for that safety crap lol. duneraider
guts them out all the time, i should have him do
a step by step FAQ.

Yes you should showtime as I will be stripping one down soon! I hope

[QuickSand]

Originally Posted by cornfeedbanshee

I striped my factory harness. cut the torrs off moved on/off switch and key to under the seat and ran the tail light wires in the frame. all the rest I used heat shrink.
turned out very clean.

Very cool! Did you drill a hole to run the talight wires? Move the cdi up front?

Originally Posted by dunedog

Yes you should showtime as I will be stripping one down soon! I hope

You will DD.. I haven't had much time in my days to get that out & even more with this weather.
I'll make it happen by this weekend k! Thanks.

[Autophysn]

electrical is my favorite. I have not done a bike yet, but a ton of trucks, cars, buggies, boats. I just can't get enough of it. There is no better feeling than taking a step back and looking at the overall appearnace of the motor, and all the looms are tucked away nice and neat.

[baddsheee]

I'm gonna try to get to my electrical cleaning up this weekend. I bought a CDI relocating bracket to move it up front. GB Racing - Gotcha Bitch Racing - Makers of custom Banshee parts I haven't took it out but looks as simple as taking out what you don't use anymore and shortening wires if possible. If I get around to it I'll try to take some pics.

[dajogejr]

You need about 4 wires out of that mess if you're not running lights, that's the funny part. Mine is stripped down...but I keep my CDI under the seat, I didn't want to cause interference with my coil in the stock mounting spot...

[dunedog]

Originally Posted by QuickSand

Very cool! Did you drill a hole to run the talight wires? Move the cdi up front?

You will DD.. I haven't had much time in my days to get that out & even more with this weather.
I'll make it happen by this weekend k! Thanks.

thanks QS! ive been sitting home all week with nothing to do I could use a project!!