Yamaha Banshee swing arm/carrier promblem

[waraches]

the only thing was my chain snaped and i removed the swing arm to replace
my chain guides and after that it started with the swing arm to shake at full throttle only

[zilla68]

then you must have left out a spacer or something in the swinger. if you put the bike on a milk crate or stand, and grab each side of the axle and shake what happens? does it wiggle.

[waraches]

yeah it does wiggle sum bit

[zilla68]

if it wiggles you missed something putting it together or a bearing is bad, that is probably your problem. Is it the swingarm wiggling or the axle in the housing?

[waraches]

is it possible that the axle drive could have bent because it did bent my
front sprocket i had to change my front sprocket after my chain snaped

[PORTED SHEE]

dam if ur front sprocket bent , i would check the tranny out

[QuickSand]

Wondering if you figured out this problem? When the chain snapped, did it get jammed up in the cases?