Wildcard Racing Yamaha Banshee Duner Build

[dunedog]

looks good Memo ! did you change both inner and outer hubs ? I always change them as a set ! I see you got the billet basket to , smart man ! they arnt nessasary, but are you gunna put fj 1000 fibers in it ? if you do your clutch will be bullet proof !

[QuickSand]

Originally Posted by PORTED R

dang brotha u got some major wear on ur clutch parts ,i just had my clutch cover off on my r
and my 20+ year old basket and hub doesnt show wear like ur banshee
i dont use my clutch very much either
is the banshee harder on clutch compenets ????

I'm not sure but those basket parts could go one for a bit more. Clutches weren't getting hung on the grooves.
I've had the billet basket on deck for sometime now, was just waiting on rebuild time.

Originally Posted by dunedog

looks good Memo ! did you change both inner and outer hubs ? I always change them as a set ! I see you got the billet basket to , smart man ! they arnt nessasary, but are you gunna put fj 1000 fibers in it ? if you do your clutch will be bullet proof !

Yup, replacing both inner and outer & already rockin the beefy fibers + some 1.2 mm steel plates! No worries bout slippage!

[Wildcard-2]

Your Banshee goodies are on there way back to you. complete with sig...lol

[QuickSand]

You guys are awesome, customer services an work is excellent, thank you.

Some pics to share...

Got my crank worked.. Needed some parts replaced. Balanced & Welded.



Closeup on the weld.



Flywheel lightened.





Top case ported dead on to match cylinders, very nice work.







Wildcard Sig = 2hp!

[Fierce]

Siggy's on there! It'll haul ass now! lol. . . Looks good. You're getting me excited for my upcoming build.

[SHOWTIME]

looks great! cant wait to see it in action!!!

[Wildcard-1]

Memo, I think you should be quite pleased with how shee will run when you get her back together and tuned in. Should prove to be a nice solid dune motor.

-B

[QuickSand]

I'm sure I will B!!

I went backwards a bit here, I just needed black cases!
Soon as I cut and match my base gaskets to that top cylinder I will bolt it all togther, just need a couple hours to get it done!
You can see all casting imperfection on those motor cases, thought bout smoothing em out but it would of been too much work. Maybe next time around.

[SandPsycho]

Looks good! Smoothing them out woulda been a waste of time, cant barely see any of it once put in the frame........

[squarepants400ex]

Looks good yo!